The Pressure Series Dialog is used by the Phase Equilibria Temperature Estimates Dialog to generate a series of state variables consisting of fixed compositions and pressures varying between specified limits.
The Pressure Series dialog provides controls for specifying fixed compositions and a range of pressure values.
|
1
|
Number of Rows Control: displays the number of table rows into which the series values will be pasted. This number is initially equal to number of table rows selected in the estimates dialog. |
|
2
|
Increment/Decrement Control: enables you to increment or decrement the number of rows into which the series values will be pasted. |
|
3
|
Tie Line Control: enables you to enter any short text string for the estimate's tie line. Typically, tie lines are entered as TL001, TL002, TL003, etc. |
|
4
|
Components Controls: displays the names of the components in the current mixture. |
|
5
|
Composition Control: enables you to specify the fixed compositions of each component. |
|
6
|
Starting Pressure Control: enables you to enter the lower limit of the generated pressures. |
|
7
|
Limit Type Control: enables you to select if pressure values will be generated between a starting and ending limit or will be incremented by a specified amount. See below for details. |
|
8
|
Limit Amount Control: enables you to enter either the upper pressure limit or the increment used to generate pressure values. See below for details. |
|
9
|
X Default Button: activates the Default Compositions Dialog which enables to select a default composition which will be entered into the composition controls. See below for documentation. |
Pressure values can be generated between two limits, the starting Pressure and the ending pressure, or by repeatedly incrementing the starting pressure by a specified amount. The dialog's Limit Type control specifies which type of series to generate.
Assuming the number of rows equals 6, the entries to the right would generate pressures of: 50, 70, 90, 110, 130, and 150 kPa.
Assuming the number of rows equals 6, the entries to the right would generate pressures of: 50, 60, 70, 80, 90, and 100 kPa.
| Topic | Description |
|---|---|
| Getting Started using Synapse | provides a quick tour of Synapse's capabilities including examples of chemical product design. |
| Getting Started using Cranium | provides a quick tour of Cranium's capabilities including a discussion of structure editing. |
| Estimating Chemical Properties | a short video demonstrating how to estimate the physical properties of chemicals using either Synapse or Cranium. |
| Estimating Mixture Properties | a short video demonstrating how to estimate the physical properties of mixtures using either Synapse or Cranium. |